Description

Molecular Hydrogen Inhaler DX900 is a side table, or floor level, appliance giving easy access to its control panel when using during bedtime, watching your favorite movie, or when performing your daily home office tasks.

This particular unit is capable of providing 99.99% pure molecular hydrogen at 900ml per minute production rate.

Inhaling molecular hydrogen H₂ is the most efficient way of getting this beneficial element into your body. At 900ml/min, you can breathe in 12,000 times the H₂ from a 500ml bottle of H₂ treated water.

Benefits

• Reduce oxidative and inflammatory damage;
• Remove malignant free radicals and nitrite anions;
• Reduce apoptosis (cell deaths), and prevent abnormal angiogenesis (cancer tumors);
• Enhance autoimmune function, overall improvement in health.

Special Features

• AUTO-TILT DETECTION Sets off alarm / outright shuts down the unit when the water tank is tilted to one side;
• WATER LEVEL DETECTION Sets off alarm when water level is below a preset low level threshold;
• WATER QUALITY DETECTION Monitors input water quality by checking the total dissolved solids (DTS), and sets off alarm accordingly.

The scientific understanding and equipment design have evolved many times in the last decade, and this model is one of the latest designs to date.

Specifications

Model	DX900	Function	Molecular hydrogen inhalation unit
Hydrogen Purity	99.99%	Technology	SPE + PEM
Water Requirement	Purified Water / Distilled Water	Input  Water Tank Capacity	2L
Production Rate	900ml / min.	Duty Cycle	Up to 8 hours of continuous work
Output Gas Type	Molecular Hydrogen H2	Certificate Approved	CE
Work Power	300W	Product Size	29 * 37.5 * 47.5cm
Input Voltage	AC110-220V 50-60Hz	Carton Size	38 * 45.5 * 55.5 cm

Using the Device

After pouring in the required quality and volume of water into the tank, the unit is basically plug and play. Start with  a 15-minute treatment at first. Increase the treatment duration with 15-minute increments as you progress.

This means that at the production rate that this unit is capable of, you may be able to finish your treatment very quickly. Or, depending on your current physical condition, you might extend your daily treatment duration as you go along.

On average, there might be a diminishing return of benefits after the 30-minute mark, depending on the unit you’ve chosen. There’s no theoretical overdose threshold, however, as the body just expels excess hydrogen molecules on its own.

Monitor and record your progress and all other treatment data in a log book.

The Science

Molecular hydrogen H₂ works wonders in your body by fusing with free radicals in the form of hydroxil, OH. The end result is H₂O, or water, essentially revitalizing dead toxic cells back into new water-based cells!

H₂ + 2(OH) => 2(H₂O)

One molecular hydrogen H2 plus two molecules of free radical OH makes two molecules of water!

Moreover, this process greatly reduces the burden imposed on the liver and kidneys, thereby greatly enhancing their ability to filter out dead parasites and viruses resulting from the Virutron™ Pro Full Spectrum Antiviral device daily treatments in the bloodstream.

The most important aspect of water is that it’s what 95% of the human body is made up of. Water is energy, intelligence and memory, rolled into one fundamental medium reflective of the unseen force driving the entire universe.

The Technology

At the heart of a good Molecular H2 Inhaler device is an SPE/PEM electrolyser.

Solid Polymerization Electrolyte (SPE) technology and Proton Exchange Membrane (PEM) are also used to produce pure and healthy hydrogen-rich water, which does not contain by-products or toxins such as ozone, chlorine and other oxides.

Proton exchange membrane (PEM) electrolysis is the electrolysis of water in a cell equipped with a solid polymer electrolyte (SPE) that is responsible for the conduction of protons, separation of product gases, and electrical insulation of the electrodes.

The PEM electrolyser was introduced to overcome the issues of partial load, low current density, and low pressure operation currently plaguing the alkaline electrolyser.

How does the PEM technology works?

Below there is a picture and description to show you how the PEM works to prevent those unwanted byproducts, in conjunction with your water quality tests:

1. PEM will allow hydrogen ions (H+) to move from anion side to cathode side;
2. The water on the anode [+] is the source of hydrogen ions (H+) following the natural law where likes poles repel each other;
3. The hydrogen atoms will be formed at the cathode side when the hydrogen ions (H+) mix with electrons from the source (reduction reaction). Then the hydrogen atoms pair to form H₂ gas, and exit to the right outlet, as shown above;
4. Oxygen molecules O₂ repelled by the cathode [-] exit to the left side of the electrolyser as shown above.
5. Depending on the amount of chlorine ions in the source water, chlorine gas may combine with hydrogen ions to form hydrochloric acid, which is harmful to the respiratory system;
6. PEM has electrolytes (SPE, solid polymer electrolyte, conductive body), so electrolysis does not depend on minerals of water source, as employed by some systems.
7. The lower the resistance between anode and cathode, the lower the voltage drop, and the higher the production efficiency of H2 electrolysis. This is why a qualified PEM/SPE membrane is used;
8. Since the pH value of drinking water does not increase, this design does not encourage the precipitation of calcium, thus greatly reducing the scale accumulation in the system.

Advantage of PEM Technology for H2 Inhaler and H2 Water Maker

One of the great advantages of PEM electrolysis is that it can work at high current density. This can reduce operating costs, especially for systems with very dynamic energy sources, such as wind and solar, where sudden surges in energy input result in uncaptured energy. Polymer electrolytes allow PEM electrolytic cells to use very thin films (~ 100-200 microns) while still allowing high pressure, resulting in low ohm loss, resulting in the main conduction of protons across the membrane (0.1s/cm) and a compressed hydrogen production.

By using solid polyelectrolyte technology (SPE) or proton exchange membrane (PEM) technology, you can produce pure and safe breathable hydrogen, and hydrogen-rich water. When inhalable hydrogen H2, or hydrogen-rich water, is clean and safe, your body is more likely to absorb the benefits of hydrogen. Remember, hydrogen is the smallest cell known, and it can travel through your body up to the source of any problem, making it directly beneficial to the health of the cells.

So it’s very important to have the right system to produce hydrogen. SPE/PEM will produce pure hydrogen-rich water without any residual chlorine or ozone. But the potential problem here is that the device must be properly designed with SPE/PEM membrane to ensure the creation of a clean drinking water.

Another problem is that we cannot control what type of water that the user will use. We recommend that you use only distilled water, or any purified water with TDS maximum of 50, and no chlorine or fluoride traces. A multi-function test instrument, or test kit for detection of these harmful substances, are available locally, in Amazon, and similar marketplaces.

We will continue to monitor all advances in this area, and in other fields of healthcare, so we can serve you better. Thank you very much for all the support!